WHITE WARE
»
»
»
» Wash Basin
»
»
»
»
»
» Colour Shade
 
HAND MADE
»
»
»
»
» Colour Shade
 
TECHNICAL
»
»
»
Technical specification of vitreous sanitaryware as per is
2556 (part i) : 1994/2004
NAME OF TEST AS PER IS2556 ( Part I)1994 STONEX TEST VALUES
1. Crazing Test No Crazing up to 2 cycle up to 5 hrs Each Cycle or 10 hours At Pressure 0.34 to 0.37 mps. No problem up to 4 cycle and no crazing
2. Water Obsorption Average value should not exceed more than 0.5% Max 0.30% show better vitrification
3. Modulus of Repture Not less than 60 mps. Min. 70 mps. / Min 80 mps.
4. Chemical Resistance No loss of reflectivity of the glaze when compared with control sample No loss of reflectivity of the glaze when compared with control sample
5. Resistance to staining and Burning No stain shall remain on either of test piece No stain shall remain on either of test piece
6. Wavy finish None on all visible surface None on all visible surface
7. Discoloration None on all visible surface None on all visible surface
 
Home | Company Profile | Vision | Quality Control | Exports | Downloads | Inquiry | Contact Us
Copyright Stonex Sanitaryware. Developed By Impression, Inc.